Siirry pääsisältöön

Publications

Conference and journal publications

2011

  • Juhala, J.; Kajaste, J. and Pietola, M.: Improving energy efficiency of hydraulic accumulator. The Twelfth Scandinavian International Conference on Fluid Power, May 18-20, 2011, Tampere, Finland.
  • Hänninen, H.; Kauranne, H.; Sinkkonen, A. and Pietola, M.: Study on energy usage of reach truck equipped energy recovery system. The Twelfth Scandinavian International Conference on Fluid Power, May 18-20, 2011, Tampere, Finland.

2010

  • Brace W.; Coatanéa E.; Kauranne H.; and Heiska M.: Formal Early design synthesis of mobile work machine. Revue d'Ingénierie Numérique Collaborative, 2010, (accepted).
  • Christophe F.; Coatanéa E.; and Bernard A.: RFBS: A model for knowledge representation of Conceptual Design CIRP Annals Manufacturing Technology. Elsevier, 2010.
  • Mol, C.; O‘Keefe, M.; Brouwer, A. and Suomela, J.: Trends and insight in heavy-duty vehicle electrification. The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, EVS-25, Shenzhen, China, Nov. 5-9, 2010.
  • Lajunen, A.; Leivo, A. and Lehmuspelto, T.: Energy consumption simulations of a conventional and hybrid mining loader The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, EVS-25, Shenzhen, China, Nov. 5-9, 2010.
  • Lehmuspelto, T.; Heiska, M. and Leivo, A.: Modular driveline concept for underground mining loader. The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, EVS-25, Shenzhen, China, Nov. 5-9, 2010.
  • Halme, J.; Liukkonen, M. and Suomela, J.: Load sharing control of dual energy storage power system in heavy duty series hybrid vehicles. The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, EVS-25, Shenzhen, China, Nov. 5-9, 2010.
  • Hentunen, A.; Suomela, J.; Leivo, A.; Liukkonen, M. and Sainio, P.: Full-Scale Hardware-in-the-Loop Verification Environment for Heavy-Duty Hybrid Electric Vehicles, The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition. EVS-25, Shenzhen, China, Nov. 5-9, 2010.
  • Liukkonen, M.; Hentunen, A. and Suomela, J.: Analysis of the ultracapacitor module in power buffering. 4th European Symposium on Super Capacitors & Applications, ESSCAP’10, Bordeaux, France, October 21-22, 2010.
  • Lajunen, A.: Evaluation of the benefits of using dual-source energy storage in hybrid electric vehicles. The 2010 IEEE Vehicle Power and Propulsion Conference (VPPC), Lille, France, September 1 – 3, 2010.
  • Hentunen, A.; Suomela, J.; Leivo, A.; Liukkonen, M. and Sainio, P.: Hardware-in-the-Loop Verification Environment for Heavy-Duty Hybrid Electric Vehicles. The 2010 IEEE Vehicle Power and Propulsion Conference (VPPC), Lille, France, September 1 – 3, 2010.
  • Liukkonen, M.; Hentunen, A. and Suomela, J.: Verification of quasi-static Series Hybrid Electric Vehicle Simulation model. The 2010 IEEE Vehicle Power and Propulsion Conference (VPPC), Lille, France, September 1 – 3, 2010.
  • Choulier D.; Coatanéa E. and Forest J.: Engineering design CK theory: contributions and limits. Proceedings of the 22nd International Conference on Design Theory and Methodology DTM, August 15-18, 2010 in Montréal, Quebec, Canada.
  • Medyna G.; Coatanéa E. and Lahti L.: Creative processes In engineering: an analogy with the evolution of wikipedia articles. Proceedings of the 22nd International Conference on Design Theory and Methodology DTM, August 15-18, 2010 in Montréal, Quebec, Canada.
  • Coatanéa E.; Ritola T.; Tumer I. and Jensen D.: A framework for Building behavioral models for design-stage failure identification using Dimensional Analysis. Proceedings of the 22nd International Conference on Design Theory and Methodology DTM, August 15-18, 2010 in Montréal, Quebec, Canada.
  • Sinkkonen, A.; Hänninen, H.; Kauranne, H. and Pietola, M.: Analysis of energy balance in electrohydraulic forklift. The Twelfth Scandinavian International Conference on Fluid Power, May 18-20, 2011, Tampere, Finland.
  • Brace, W. and Thramboulidis, K.: From requirements to design specifications- a formal approach. International design conference - design 2010, Dubrovnik - Croatia, May 17 - 20, 2010.
  • Medyna G. and Coatanéa E.: Decision making and value considerations during the early stages of engineering design. CIRP Design Conference 2010, April 19 – 21, 2010, Nantes, France.
  • Huttunen, A.; Brace, W.; Kantola, V.; Lechner, L.; Kulovesi, J. and Silvennoinen, K.: Cross-cultural application of ethical principles into the design process, case external and internal roboethics. International conference on engineering and meta-engineering: ICEME 2010. Orlando, Florida, USA, 6 – 9 April 2010.
  • Juhala, J.; Kauranne, J. and Pietola, M.: Energy losses in piston type hydraulic accumulator. Proceedings of the 7th International Fluid Power Conference Aachen, 22- 24. March, 2010, Aachen, Germany, p. 177-188, ISBN 978-3-940565-93-8.
  • Hänninen, H.; Juhala, J.; Sinkkonen, A.; Hentunen, A. and Pietola, M.: Comparing hybrid power transmission systems of work machines. Proceedings of the 7th International Conference on Fluid Power (IFK), 22 - 24 March 2010, Aachen, Germany. p. 189-200, ISBN 978-3-940565-92-1.

2009

  • Medyna G.; Coatanéa E. and Millet D.: Comparative study of environmental evaluation assessment using exergetic LCA implemented in existing software and a novel exergetic approach during the early design phase. ICED'09, Stanford university, Stanford, CA, USA, 24 - 27 AUGUST 2009 (accepted).
  • Medyna G.; Coatanéa E.; Lahti L.; Howard T.; Brace W. and Christophe F.: Creative design: Analysis and ontology. ASME- IDETC 2009, August 30 - September 2, 2009 in San Diego, California, USA, 2009 (submitted).
  • Christophe F.; Sell R.; Bernard A. and Coatanéa E.: OPAS: Ontology processing for assisted synthesis of conceptual design solutions. ASME- IDETC 2009, August 30 - September 2, 2009 in San Diego, California, USA, 2009 (submitted).
  • Brace W.; Coatanéa E.; Kauranne H. and Heiska M.: Early design modelling and simulation of behaviours: case study of mobile work machine. ASME- IDETC 2009, August 30 - September 2, 2009 in San Diego, California, USA, 2009 (accepted).
  • Brace W.; Coatanéa E.; Kauranne H. and Heiska M.: Formal Early design synthesis of mobile work machine and concept generation. CPI´2009, October 19 - 21, in Fés Morocco (abstract accepted).
  • Brace W. and Coatanéa E.: Semi formal requirement formulation in system engineering. ICED'09, Stanford university, Stanford, CA, USA, 24 - 27 AUGUST 2009 (accepted).
  • Sainio P.; Heiska M.; Lehmuspelto T. and Suomela J.: Comparison of packaging hydraulic and electric components in a HEV power line. The International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, EVS24, Stavanger, Norway, 13. – 16 May, 2009.
  • Halme J.; Liukkonen M. and Suomela J.: Power bus control for series hybrid heavy-duty vehicles. The International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, EVS24, Stavanger, Norway, 13. – 16 May, 2009.
  • Liukkonen M.; Hentunen A.; Suomela J. and Kyyrä J.: Low-pass Filtered Power-flow Control in Series Hybrid Electric Vehicle. The International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, EVS24, Stavanger, Norway, 13. – 16 May, 2009.
  • Leivo A.; Hentunen A. and Suomela J.: Model reusability and cooperation in model based HEV control system development. The International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, EVS24, Stavanger, Norway, 13. – 16 May, 2009.
  • Heiska, M.; Leivo, A.; Hentunen, A.; Suomela, J.; Sainio, P. and Halme, J.: Hybridization of a Mobile Work Machine. The International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, EVS24, Stavanger, Norway, 13. – 16 May, 2009.
  • Heiska M.; Halme J.; Hentunen A.; and Suomela J.: Työkoneen sarjahybridijärjestelmän ohjausarkkitehtuuri Automaatio XVIII Seminaari, Helsinki, Finland, 17.–18.3.2009.

2008

  • Coatanéa E.; Alizon F.; Christophe F. and Yannou B.: Technology Selection Method: A New Approach identifying Relevant Technology Alternatives during a Product Family Design. Journal of Computing and Information Science in Engineering (Submitted), ASME journal, 2008.
  • Christophe F.; Sell R.; Coatanéa E. amd Tamre M.: Conceptual design framework supported by Dimensional Analysis and System Modeling Language. Estonian Journal of Engineering, ISSN 1736-6038, 2008.
  • Yannou B. and Coatanéa E.: The COMPARE method for easy and fast specification and design selection by product pairwise comparisons In Revue internationale d’ingénierie numérique, Conception Collaborative et Ingénierie Numérique, Hermès Science Lavoisier (accepted), ISSN 0298-0924, 2008.
  • Coatanéa E.; Alizon F.; Christophe F. and Yannou B.: Selecting technology alternatives for product families through technological coverage and functional verification. In Proceedings of ASME design engineering technical conferences DETC 2008, New-York, USA, 2008.
  • Christophe F.; Sell R.; Coatanéa E. and Micaëlli J.P.: Integrated design framework: Towards an approach for early design. International conference on engineering and product design education, UPC, Barcelona, Spain, 4 & 5 September 2008.
  • Liukkonen M.; Hentunen A.; Suomela J. and Kyyrä J.: Functional Simulations of Power Electronics Components in Series-Hybrid Machinery for the needs of OEM. In Nordic Workshop on Power and Industrial Electronics (NORPIE/2008), Espoo, Finland, June 9-11, 2008.

Theses

Dissertations

  • Kostov, K. (2009) Design and Characterization of Single-Phase Power Filters. TKK Doctoral thesis.

Master's Theses

  • Riihimäki, J. (2009) Innovative conceptual solutions for sand casting pattern creation process using TRIZ methodology. TKK Master thesis.