Julkaisut

Lehti- ja konferenssiartikkelit

Emre Ilke Cosar, Aamir Mahmood and Mikael Björkbom (ed),
A-Stack: A TDMA framework for reliable, real-time and high data-rate wireless sensor networks,
Helsinki: Aalto University, Dept. of Automation and Systems Technology, 2012. (Aalto University publication series: SCIENCE + TECHNOLOGY, 2/2012).
Electronic publication
Mikael Björkbom, Riku Jäntti and Heikki Koivo,
"Real-time wireless sensor systems for monitoring and control,"
in Automaatio XIX SEMINAARI 15.-16.3.2011, Arto Visala (toim.), Helsinki: Suomen Automaatioseura ry, 2011, 6 pp.
Electronic publication
Maurizio Bocca,
Application-driven data processing in wireless sensor networks,
Helsinki, Finland: Aalto University, 2011. (Aalto University publication series, DOCTORAL DISSERTATIONS, 93/2011).
Electronic publication
Maurizio Bocca and Heikki Koivo,
"Kick-off: an initialization procedure for convergecast in wireless sensor networks,"
in Proceedings of Mosharaka International Conference on Communications and Electronic Systems, Jaser Mahasneh (ed.), Dubai, UAE: Mosharaka for Researches and Studies, 2011, 6 pp.
Maurizio Bocca, Aamir Mahmood, Lasse M Eriksson, Jyrki Kullaa and Riku Jäntti,
"A Synchronized Wireless Sensor Network for Experimental Modal Analysis in Structural Health Monitoring,"
Computer-Aided Civil and Infrastructure Engineering (CACAIE), Vol. 26, no. 7, pp. 483-499, 2011.
Electronic publication
Maurizio Bocca, Janne Toivola, Lasse M Eriksson, Jaakko Hollmen and Heikki Koivo,
"Structural health monitoring in wireless sensor networks by the embedded Goertzel algorithm,"
in CPSWeek 2011 Conference & WiP Proceedings, Chicago, USA: IEEE, 2011, 9 pp.
Emre I Cosar, Aamir Mahmood and Mikael Björkbom,
"A-Stack: A Real-Time Protocol Stack for IEEE 802.15.4 Radios,"
in Proc. IEEE 36th Conference on Local Computer Networks (LCN), October 4-7, 2011, Bonn, Germany, 2011, pp. 1020-1023.
Electronic publication
Lasse Eriksson, Joni Silvo, Mikael Björkbom, Jari Nieminen and Riku Jäntti,
"Kohti reaaliaikaista ja luotettavaa langatonta automaatiota,"
Automaatioväylä, Vol. 3, s. 24-27, 2011.
Electronic publication
Jyrki Kullaa,
"Distinguishing between sensor fault,structural damage, and environmental or operational effects in structural health monitoring,"
Mechanical Systems and Signal Processing, Vol. 25, no. 8, s. 2976–-2989, 2011.
Electronic publication
Jyrki Kullaa,
"Separating three sources of changes in structural health monitoring,"
in Sensors, instrumentation and special topics, Volume 6: Proceedings of the 29th IMAC, A Conference on Structural Dynamics, T. Proulx, Springer, 2011, s. 17–25.
Pin Nie, Juho Vähä-Herttua, Tuomas Aura and Andrei Gurtov,
"Performance Analysis of HIP Diet Exchange for WSN Security Establishment,"
in Proc. The 7th Annual International Symposium on QoS and Security for Wireless and Mobile Networks 2011. Miami, FL, USA. Oct 31- Nov 04, MSWiM 2011: ACM, 2011, 6.
A Deraemaeker, A Preumont, E Reynders, G De Roeck, J Kullaa, V Lamsa, K Worden, G Manson, R Barthorpe, E Papatheou, P Kudela, P Malinowski, W Ostachowicz and T Wandowski,
"Vibration-based structural health monitoring using large sensor networks,"
Smart structures and systems, Vol. 6, no. 3, pp. 335-347, 2010.
J Kullaa, M Bocca and L.M Eriksson,
"Energy-efficient SHM in wireless sensor networks by damage detection from short time series,"
in Proceedings of the 5th European Workshop on Structural Health Monitoring, F Casciati and M Giordano (eds.), DEStech Publications, 2010, 943–948.
Jyrki Kullaa,
"Detection, identification, and quantification of sensor fault,"
in Proceedings of ISMA2010, International Conference on Noise and Vibration Engineering – CD ROM, P Sas and B Bergen (eds.), KU Leuven, 2010, 893–907.
Jyrki Kullaa,
"Sensor validation using minimum mean square error estimation,"
Mechanical systems and signal processing, Vol. 24, no. 5, pp. 1444-1457, 2010.
Jyrki Kullaa, Arnaud Deraemaeker and Keith Worden (Eds.),
New trends in vibration based structural health monitoring,
UK: Springer, 2010.
Ville Lämsä and Tapani Raiko,
"Novelty detection by nonlinear factor analysis for structural health monitoring,"
in Proceedings of the 2010 IEEE International Workshop on Machine Learning for Signal Processing (MLSP 2010), Samuel Kaski, Miller David J., Erkki Oja and Antti Honkela (eds.), IEEE, 2010, 468-473.
Electronic publication
Pin Nie and Zhihua Jin,
"Morph: Cognitive Clustering for Wireless Sensor Networks using Smart Materials,"
in Proc. EWSHM 2010, Sorrento, Italy, June 2010, 2010, 7.
Pin Nie and Zhihua Jin,
"Requirements, Challenges and Opportunities of Wireless Sensor Networks in Structural Health Monitoring,"
in Conference on Broadband Network and Multimedia Technology, 2010, 6.
Pin Nie, Zhihua Jin and Yi Gong,
"Mires++: A Reliable, Energy-aware Clustering Algorithm for Wireless Sensor Networks,"
in 13th ACM International Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems, 2010, 9.
Electronic publication
M Bocca, E. I Cosar, J Salminen and L. M Eriksson,
"A reconfigurable wireless sensor network for structural health monitoring,"
in Proceedings of the 4th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Urs Meier, Bernadette Havranek and Masoud Motavalli (eds.), Zurich, Switzerland: International Society for Structural Health Monitoring of Intelligent Infrastructure; EMPA, 2009, 9 pp.
Emre I Cosar, Maurizio Bocca and Lasse M Eriksson,
"High speed portable wireless data acquisition system for high data rate applications,"
in Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference - IDETC/CIE 2009, San Diego, USA: ASME, 2009, 11 pp.
Emre Ilke Cosar,
A wireless toolkit for monitoring applications,
Master's thesis, Department of Automation and Systems Technology, Helsinki University of Technology, Espoo, Finland, 2009. (Helsinki University of Technology, Control Engineering, Report 164).
Jyrki Kullaa,
"Continuing structural health monitoring after repair: Experimental results,"
in Proceedings of the International Conference on Structural Engineering Dynamics (ICEDyn 2009), Portugali: 2009, paper 30.
Jyrki Kullaa,
"Three models for sensor validation,"
in Proc. Proceedings of the 7th International Workshop on Structural Health Monitoring, Standford, CA, September 9-11, 2009, 2009, 529-536.
Janne Toivola and Jaakko Hollmén,
"Feature Extraction and Selection from Vibration Measurements for Structural Health Monitoring,"
in Advances in Intelligent Data Analysis VIII, Céline Robardet Niall M. Adams and Jean-François Boulicaut Arno Siebes (Eds.), Berlin Heidelberg: Springer-Verlag, 2009, pp. 213-224.
Electronic publication
Jyrki Kullaa,
"Continuing Structural Health Monitoring After Repair: Starting from Scratch?,"
in Proc. The 3rd International Conference "Smart Materials, Structures and Systems", Acireale, Sicily, Italy, June 8-13, 2008, 2008.
Jyrki Kullaa,
"Continuing structural health monitoring after repar: Starting from scratch,"
Advances in Science and Technology, Vol. 56, 495-501, 2008.
Jyrki Kullaa,
"Eliminating environmental influences in structural health monitoring using spatiotemporal correlation models,"
in Proc. Fourth European Workshop on Structural Health Monitoring, Krakow, Poland, July 2-4, 2008, 2008, 1033-1040.
Ville Lämsä and Jyrki Kullaa,
"Data Normalization with Partially Measured Environmental or Operational Variables,"
in Proceedings of the Fourth European Workshop on Structural Healt Monitoring, 2008, 1041-1048.